EasyManua.ls Logo

Master Water Conditioning MBA Series - System Description

Master Water Conditioning MBA Series
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
ALL UNITS NOW COME WITH THE NEW VORTECH
* NO GRAVEL IS NEEDED
NOTE: Product Change for MBA-AN-1229 ACID NEUTRALIZER
The brine plug (1030334) was added, and the brine sight glass
connection is plugged with a red cap (TV-6A Red Cap). See
Figure below. DO NOT REMOVE CAPS OR PLUGS.
NOTE: THIS FILTER IS NOT INTENDED TO BE USED FOR TREATING WATER THAT
IS MICROBIOLOGICALLY UNSAFE OR OF UNKNOWN QUALITY WITHOUT
ADEQUATE DISINFECTION WHETHER BEFORE OR AFTER THE SYSTEM
System Description:
The filter tank has a Logix top mounted automatic control valve with
an electronic time clock to initiate regeneration. The Logix Valve is
constructed of non-corrosive Noryl material and is rated at a
maximum working water pressure of 100 psi. It uses a 742
microprocessor based timer to actuate regeneration in the following
ways:
a. Manual regeneration button to start an emergency
regeneration
b. Regeneration day setting

Related product manuals