Need help?Do you have a question about the Master Water Conditioning MP-NS-30T and is the answer not in the manual?
Details the components included in the shipping carton for the unit.
Explains the Logix top-mounted control valve and its operating principles.
Instructions for placing the combination unit in its operational location.
Steps for loading filter media into the combination unit's mineral tank.
Details on connecting the drain, o-rings, and placing the valve onto the distributor pipe.
Specifies drain connection size, maximum length, height, and air gap requirements.
Guidelines for proper electrical connections, including outlet type and power supply.
Instructions for locating the brine tank and connecting the regenerant line.
Lists and briefly describes the different regeneration cycles (C1-C8).
Guides on setting the current time and day of the week on the control valve.
Instructions for configuring the scheduled time for regeneration cycles.
Details on setting regeneration day override, salt amount, and softening capacity.
Instructions for setting the water hardness level on the control valve.
A checklist of final steps before operating the water conditioner.
Identifies causes and solutions for the unit not drawing brine.
General| Brand | Master Water Conditioning |
|---|---|
| Model | MP-NS-30T |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
