Master Water Conditioning SIMPLUS 744

Need help?

Do you have a question about the Master Water Conditioning SIMPLUS 744 and is the answer not in the manual?

Summary

System Setup and Positioning

Simplus Tank Loading

Step-by-step instructions for filling the mineral tank with media.

Logix Control Valve Installation

Valve Connections and Mounting

Instructions for connecting the Logix control valve to the tank and bypass.

Service and Drain Piping

Piping Requirements and Guidelines

Details on connecting water service lines and drain piping, including air gap requirements.

Electrical and Chlorine Tank Setup

Electrical Requirements

Control Valve Electrical and Water Filling

Logix Control Valve Electrical Connection

Guide for connecting the control valve's power supply and transformer.

Filling Simplus with Water

Procedure for filling the unit with water and initiating manual regeneration.

Logix Control Valve Timer Settings

Timer Configuration Steps

Instructions for setting time of day, day of week, and regeneration frequency.

Final System Checks

Final Installation Verification

General Troubleshooting

Rotten Egg Odor Issues

Regeneration Failures

Solutions for when the unit does not regenerate properly, impacting treated water.

No Chlorine Draw Problems

Advanced Troubleshooting

Insufficient Chlorine Draw

Media Loss and Leaks

Troubleshooting Common Issues

Loss of Water Pressure

Timer Display Malfunctions

Incorrect Regeneration Timing

700 Series Controller Error Codes

ERR 1, ERR 2, ERR 3 Resolution

Steps to resolve ERR 1, ERR 2, and ERR 3 error codes on the controller.

Camshaft and Motor Troubleshooting

Diagnosing issues with camshaft rotation and motor operation for the controller.

Simplus Timer Operation Guide

Setting Time of Day and Regeneration

Step-by-step instructions for setting the Simplus timer for time and regeneration.