Master Kerosene MH-80-OFR - Whats in the Box; 80-OFR Contents and Tools; Assembly; 80-OFR Assembly Instructions

WHAT’S IN THE BOX
80-OFR
Tools Needed:
– Phillips Head Screw Driver
Attach the handle while still in the box for easier unpacking (see Figures 1 and 2).
ASSEMBLY
80-OFR
IMPORTANT: INSTALL HEAT SHIELD BEFORE OPERATING YOUR 80-OFR HEATER
1. Remove existing screws from shell ring on either side of heater (see Figure 3) .
2. Line up holes on heat shield with holes in shell ring. Attach with screws removed in step 1 (see Figures 4 and 5).
WHAT’S IN THE BOX
125-OFR-A