56
Storage
The aluminium rail can be folded when the machine is unused. Unscrew the knob (50) until the taper
completely withdraw from the aluminium rail link (62) and at the same time draw the knob down until it cannot
move anymore. Then uprear the aluminium rail by the other hand to an angle until the knob (50) break away
form the rail link (62), you can release the knob now. When the aluminium rail rotates to a certain angle the
knob will automaticaly fit into the hole on the aluminium rail link (62, after that screw the knob (50) tight.
ATTENTION!
The saddle will slide down when folding the aluminium rail!
It is easy to hit your head when the rail is standing upright!
To Next Page
Loading...
