EasyManuals Logo

MasterCool COMMANDER Series User Manual

MasterCool COMMANDER Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22 www.mastercool.com
1. Connect the high side red coupler to the high side service fitting on the vehicle.
2. Connect the low side blue coupler to the low side service fitting. Press next to continue.
3. Open the couplers by turning the knobs clockwise until they stop. Press next to continue.
4. Open the blue and red valves on the machine. Press next to start the process.
NOTE: Each step in the reclamation process will be displayed with individual progress screens.
Identification
If the refrigerant ID process has passed the machine will automatically move on to recovery. If the refrigerant ID
fails, follow the prompts to clear hoses and exit.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCool COMMANDER Series and is the answer not in the manual?

MasterCool COMMANDER Series Specifications

General IconGeneral
TypeRefrigerant Recovery Machine
ModelCOMMANDER Series
CategoryService Equipment
Refrigerant CompatibilityR-12, R-134a, R-22, R-410A, R-404A
Frequency60 Hz
Recovery Rate6 lbs/min
CompressorOil-less

Related product manuals