23www.mastercool.com
Automatic Recovery
The following will be displayed:
COMMANDER4100
COMMANDER4100-E*
• Amount of refrigerant being recovered; numerically and in the tank graphic
• Tank temperature and pressure
• Amount of waste oil recovered
• Vehicle pressure
• Total weight of refrigerant in tank
• Progress procession graphic on the left of all screens
Automatic Vacuum/Leak Test
The default is a 10 minute vacuum/leak test. The vacuum pump will run for 8 minutes pause for 2 minute leak
test and resume for an additional 2 minutes of vacuum.
The following will be displayed:
COMMANDER4100
To Next Page
Loading...