Need help?Do you have a question about the MasterCool COMMANDER3000-E and is the answer not in the manual?
General| Brand | MasterCool |
|---|---|
| Model | COMMANDER3000-E |
| Category | Test Equipment |
| Language | English |
Emphasizes reading and following all safety instructions for safe operation.
Specifies conditions for using extension cords to prevent electrical hazards.
Alerts about health risks from breathing refrigerant fumes and vapors.
Details risks of frostbite and severe burns from mishandled refrigerants.
Stresses recovering only approved refrigerants to prevent explosions.
Describes hose flushing for hybrid vehicles and associated warnings.
Provides detailed steps for filling the internal tank with refrigerant from an external source.
Details hose flushing for hybrid systems and the preprogrammed recovery process.
Guides on setting vacuum time and leak test parameters within the automatic mode.
Guides on setting refrigerant charge and using the vehicle database for automatic programming.
Provides instructions for connecting hoses and opening couplers to the vehicle.
Shows what is displayed during the automatic refrigerant recovery phase, including key metrics.
Describes the screen during vacuum and leak testing and how results are displayed.
Shows the display during automatic oil injection and related alerts for oil levels.
Shows the display after refrigerant has been charged to the vehicle, including final metrics.
Details the process for verifying pressures and clearing refrigerant from hoses.
To Next Page
