Need help?Do you have a question about the MasterCool COMMANDER2000 and is the answer not in the manual?
General| Model | COMMANDER2000 |
|---|---|
| Category | Test Equipment |
| Manufacturer | MasterCool |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Refrigerant | R134a, R22, R404A |
| Units of Measure | psi, kPa, °F, °C |
Provides safety guidelines and general safety information for operating the equipment.
Details risks related to electrical shock, moving parts, and hazardous fumes/gases.
Important notes on R134a systems, inspection, and manufacturer's responsibility.
Explanation of the machine's core function in recovering, recycling, and recharging refrigerant.
Introduction to the main menu and its core options: Status, Settings, Maintenance, Documents, Help.
Overview of required routine maintenance tasks like tank filling, purge, and filter changes.
Instructions for internal tank filling and manually purging NCG (air) from the tank.
Steps for filling oil injection bottles and managing the used oil bottle.
Step-by-step guide for filling the machine's internal tank from an external source.
Selecting between automatic and manual operation modes on the Commander machine.
Configuration of hose flushing (COMMANDER3000) and the preprogrammed recovery process.
Setting the desired vacuum time and configuring the leak test parameters.
To Next Page
