MasterCool MCP44(C) User Manual

4
BEFORE INSTALLING
WARNING: Do not connect electrical power to the unit
until the installation is completed.
The MasterCool MCP Series cooler can be installed in a
sash-style or a slider-style window.
Alternatively, this unit is approved for in-wall installations.
REQUIRED CLEARANCES/ SPECIFICATIONS:
In all installations, the following clearances are required:
• Width: 22”
• Height: 22” PLUS: 4” additional space required above
exterior of cabinet for maintenance.
• Weight: 93 lbs operating weight.
Tools & Materials Required: (Not supplied)
• Drill (power or cordless)
• Assorted drill bits (for drilling pilot holes for mounting
hardware)
• Adjustable Wrench
• Phillips Head Screwdriver
• Silicone or all-weather caulk for sealing closeout panels
to window frame
• Bubble level ( 3 foot level is preferred)
• Spacer material (as required)
Water connection Option 1
• Standard water hose
Water connection Option 2
• Sill-cock valve
• Length of ¼” copper or plastic tubing
Parts
CALL 1-800-643-8341 IF YOU FIND PARTS
MISSING OR HAVE ANY QUESTIONS.If If
Cooler Assembly
1. Remove unit from box. Verify that all parts are included.
2. Remove all packing materials, as shown below.
CALL 1-800-643-8341 IF YOU FIND PARTS
MISSING OR HAVE ANY QUESTIONS.

MasterCool MCP44(C) Specifications

General

Brand	MasterCool
Model	MCP44(C)
Category	Air Conditioner
Language	English