Motor
120 V, 60 Hz, 6A
Variable speeds
0 2700 RPM (no load)
Hammer
0 43,200 BPM (no load)
Keyed chuck
1/2” (12.7 mm)
Drilling capacity
in w ood
1” (25.4 mm)
in metal
1/2” (12.7 mm)
in concrete
1/2”
Weight
4 lb 13 oz (2.2 kg)
TECHNICAL SPECIFICATIONS
SPECFICATIONS
SAFETY GUIDELINES:
Safety symbols in this instruction manual are used to flag possible dangers. The safety symbols
and their explanations require your full understanding. The safety warnings do not, by themselves,
eliminate any danger, nor are they substitutes for proper accident prevention measures.
This safety alert symbol indicates caution, warning, or danger. Failure to obey a safety warning can
can result in serious injury to yourself or others. To reduce the risk of injury, fire, or electric shock, always
follow the safety precautions.
KNOW YOUR TOOL
To operate this tool, carefully read this instruction manual and all labels affixed to the hammer drill
before using. Keep this manual available for future reference.
IMPORTANT
This tool should only be serviced by a qualified service technician. For more information, call the toll-free
helpline at 1-800-689-9928.
READ ALL INSTRUCTIONS THOROUGHLY
Save these instructions
WARNING:
READ ALL SAFETY WARNINGS AND INSTRUCTIONS. FAILURE TO FOLLOW THE WARNINGS AND
INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE AND/OR SERIOUS INJURY.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
THE TERM “POWER TOOL” IN THE WARNINGS REFERS TO YOUR MAINS-OPERATED (CORDED) POWER
TOOL OR BATTERY-OPERATED (CORDLESS) POWER TOOL.
model no.054-2015 l contact us 1.800.689.9928
SAFETY GUIDELINES
(12.7 mm)
－
－
To Next Page
Loading...
Need help?
General
