MasterCraft 54-2887-0 User Manual

18 V Ni-Cd CORDLESS DRILL
54-2887-0
Owner’s Manual
PRODUCT SPECIFICATIONS
Battery:
Two 18 V, 1.5 Ah Nickel-cadmium
Maximum torque:
285 in-lb
Variable speed ranges:
0–450 & 0–1,450 RPM (no load)
Torque clutch positions:
21 + drill mode
Keyless chuck:
1/2" (13 mm)
Maximum drilling depth:
1/2" (13 mm) in steel
2 9/16“ (6.5 cm) in wood
Charger:
1.5–2 hour diagnostic, Class 2
Charger input:
120 V AC, 60 Hz
Charger output:
14.4 to 18 V DC, 1 A (maximum)
Replacement charger:
54-3103-0 (LED), 54-3101-4 (LCD)
Replacement battery:
54-3102-2 (Ni-Cd)
Replacement battery:
54-3100-6 (Lithium-ion)
Weight:
4 lb 6 oz (2.0 kg) without battery
NEED ASSISTANCE?
Call us on our toll-free Customer Support Line:
1-800-689-9928
Imported by Mastercraft Canada Toronto, Canada M4S 2B8
Patent Pending

MasterCraft 54-2887-0 Specifications

General

Model	54-2887-0
Category	Drill
Type	Hammer Drill
Voltage	120V
Corded/Cordless	Corded
Chuck Size	1/2 inch

Summary

General Safety Warnings

Eye, Ear & Lung Protection

Emphasizes wearing safety goggles and hearing protection during operation.

Electrical Safety

Covers precautions to avoid electrical hazards, fire, and tool damage from electricity.

Power Tool Safety

General Safety Rules

Personal Safety Precautions

Advice on alertness, proper attire, and avoiding distractions during use.

Use and Care of Power Tools

Specific Safety Rules

Tool Operation Safety Guidelines

Battery and Charger Safety

Battery Handling and Charging

Instructions on using the correct charger and safe battery storage.

Charger Usage and Safety

Assembly and Operating Procedures

Charging the Battery Pack

Step-by-step guide on how to charge the battery using the provided charger.

Charger LED Indicators

Installing and Removing Battery

Instructions for inserting and removing the battery pack from the drill.

Adjusting Torque Settings

Guide on how to set the torque clutch for different drilling and driving tasks.

Speed and Direction Controls

Level and Trigger Operation

Details on using the built-in spirit level and the variable-speed trigger switch.

Installing and Removing Drill Bits

Drilling Techniques and Safety

Guidance on safe and effective drilling into various materials, including workpiece securing.

Screw Driving Techniques

Instructions for driving screws, including selecting bits and setting torque.

Maintenance and Care

Nickel-Cadmium Battery Care

Warranty Information

3-Year Limited Warranty Details

Overview of the product's warranty period and coverage for different components.

Warranty Conditions and Limitations

Additional Warranty Limitations and Consumer Rights