MasterCraft 054-2437-2 User Manual

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-2437-2 | contact us 1-800-689-9928
8
W .................... Watts
min ................. Minutes
................. Alternating current
or d.c ..... Direct current
n
0
................... No-load speed
............... Class II Construction
…/min or …min
-1
........... Revolutions or reciprocation per minute
SFPM ............... Surface feet per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
.............. WARNING – To reduce the risk of injury, always wear eye protection.
.............. WARNING – To reduce the risk of injury, always wear ear protection.
• A suitable breathing respirator must be worn while sanding lead paint, some woods
and metal to avoid breathing the harmful/toxic dust or air.
• Always wear safety goggles and a dust mask when sanding, especially when sanding
overhead.
• The machine is not suitable for wet sanding.
• Do not use sanding paper that is larger than needed. Extra paper extending beyond the
sanding pad can cause serious lacerations.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more
securely than by hand.
• Attach the dust bag to the tool and empty it frequently. Do not throw sanding dust on an
open fire, because materials in fine particle form may be explosive.
• If the replacement of the supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
SAFETY GUIDELINES

MasterCraft 054-2437-2 Specifications

General

Brand	MasterCraft
Model	054-2437-2
Category	Sander
Language	English