MasterCraft 054-3179 User Manual

CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0
7 8
Contents:
Hammer drill, chuck key, auxiliary handle, depth-stop gauge and instruction manual.

• 8 pcs HSS drill bits: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 1/4"
• 6 pcs masonry drill bits: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
• 6 pcs wood-boring bradpoint drill bits: 1/8", 5/32", 3/16", 1/4", 9/32", 5/16"
• 4 pcs nut drivers: 3/16", 1/4", 5/16", 3/8"
• 18 pcs screwdriver bits (1"):
Hex: 3/32", 1/8", 5/32", 3/16", 1/4"
Slotted: 3-4, 6-8, 8-10, 10-12
PH1, PH2(x4), PH3
S1, S2, S3
• 7 pcs screwdriver bits (2"):
Slotted: 6-8, 8-10
PH2, PH3
S1, S2, S3
• 1pc screw guide: 76mm X dia 11.5mm
WARNING!
Remove the hammer drill from the package and examine it carefully. Do not discard the
carton or any packaging material until all parts have been examined.
SAFETY GUIDELINES
Safety guidelines for hammer drill
  Exposure to noise can cause hearing loss.
  Loss of control can cause personal injury.
 
 Contact with a “live”
wire may make exposed metal parts of the power tool “live” and could give the operator an electric
shock.
 

V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
 
Holding the workpiece by hand or against your body is unstable and may lead to loss of
control.
 
Constantly stay aware of the cord location. Following this rule will reduce the risk of
electric shock or fire.
SAFETY GUIDELINES

MasterCraft 054-3179 Specifications

General

Brand	MasterCraft
Model	054-3179
Category	Drill
Language	English