Need help?Do you have a question about the MasterCraft 055-6762-0 and is the answer not in the manual?
General| Amperage | 15 A |
|---|---|
| Corded/Cordless | Corded |
| No Load Speed | 5000 RPM |
| Dust Collection | Dust bag included |
| Blade Size | 10 inches |
| Blade Diameter | 10 inches |
| Motor | 120 V |
| Bevel Range | 0° to 45° |
| Miter Range | 0° to 45° left and right |
General safety precautions to ensure safe operation and prevent injuries.
Step-by-step guide for safely removing and installing the saw blade.
Instructions for attaching the dust collection bag to the saw.
Information on reading and using the mitre scale for angle settings.
Procedure to adjust the mitre angle indicator for accuracy.
How to ensure the saw fence is square to the blade for precise cuts.
Adjusting the stops for precise bevel angles.
Procedure for safely securing the cutting head for transport or operation.
Guidelines for securely mounting the saw and installing the work clamp.
Operation of the power switch and performing a dry run for safety.
Instructions for performing standard mitre, bevel, and compound cuts.
Techniques for cutting warped material and base moulding.
Steps for cutting crown moulding and using the angle chart.
Cleaning accumulated sawdust for smooth operation.
Importance and maintenance of the lower blade guard.
Procedure for replacing worn carbon brushes.
Lubrication points for maintaining smooth movement.
To Next Page
