Need help?Do you have a question about the MasterCraft 055-6745-2 and is the answer not in the manual?
General| Blade Size | 10 inches |
|---|---|
| Amperage | 15 A |
| Blade Diameter | 10 inches |
| No Load Speed | 5000 RPM |
| Dust Collection | Yes |
| Motor | 120 V |
| Bevel Capacity | 0° - 45° left |
| Miter Capacity | 45° left & right |
Important safety rules for operating the mitre saw.
Safety precautions related to electrical components and connections.
Guidelines for safe use of the laser cutting guide.
Detailed steps for blade replacement on the saw.
Explanation of the mitre scale and its use for angle adjustments.
Procedure to adjust the saw head to a 0° bevel position.
Steps to adjust the saw head to a 45° bevel angle.
Procedure for setting the maximum cutting depth of the saw.
How to move and secure the saw's cutting head.
Guide to using the laser cutting guide for accurate cuts.
Steps for performing a standard mitre cut.
Steps for performing a bevel cut on the workpiece.
How to perform a combined mitre and bevel cut simultaneously.
Steps for cutting wide boards using the slide feature.
Pre-setting the cutting depth for shallow cuts.
Instructions on how to cut grooves in material.
Information on the lower blade guard's function and care.
Steps for replacing the motor carbon brushes.
Specifies the warranty period and coverage against defects.
Further restrictions and conditions on the product warranty.
Information regarding consumer rights and provincial laws.
To Next Page
