MasterCraft 058-1294-8 User Manual

model no. 058-1294-8 | contact us 1-800-689-9928
8
9
NOITARAPERP YLBMESSA
MARGAID STRAP YEK
KEY PARTS DIAGRAM
Description
Welding cable and electrode holder
No.
A
B
C
D
E Ground cable and clamp
Current adjustment
WARNING!
Make sure the welder is disconnected to the power supply when operating.
When machine is laid on its side, do it gently or the impact could damage internal components.
During installation use caution not to do personal injury from lifting.
ON/OFF switch
Indicator lights
2.3 Finally, install the handle using four sets of screw and washers as shown:
model no. 058-1294-8 | contact us 1-800-689-9928model no. 058-1294-8 | contact us 1-800-689-9928model no. 058-1294-8 | contact us 1-800-689-9928
model no. 058-1294-8 | contact us 1-800-689-9928
A
C
D
B
E

MasterCraft 058-1294-8 Specifications

General

Brand	MasterCraft
Model	058-1294-8
Category	Welding System
Language	English