headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
10 11
INTENDED USE
INTENDED USE
WARNING!
This air compressor is not designed for continuous operation or unlimited commercial operations
and must be used in dry areas only. This air compressor is intended to be used in maximum
30-minute intervals and should rest for 30 minutes before used again. Do not exceed the
maximum working time.
Air Tool
Tool Compatibility Chart
Operates Tool
Continously
Not
Recommended
Operates Tool
Intermittently
Finishing Nailer (16 gauge)
Framing Nailer
Flooring Nailer
Die Grinder/Angle
Grinder/Air Ratchet
Cut-Off Tools
DIY Paint Sprayers
Brad Nailer (18 gauge)
3-in-1 Brad/Finishing/Stapler
Impact Wrench
Drill/Hammer/Chisel/Shears
Sander/Polisher
Grease/Caulking Gun
Before you start
This Mastercraft
®
Air Compressor is ideal for a wide range of applications, from fastening to greasing and
engine cleaning. The 5-gallon (18.9 L) design provides optimum pressure. It features a 1.5 HP induction
motor for quiet operation and a cast-iron, oil-free pump for long-lasting, reliable performance.
The procedures described in this manual are solely for this 5-gallon (18.9 L) air compressor at a maximum
of P=175 PSI. The device has been designed/constructed for household use only.
Compatible compressor and air tool: proper usage and operation
Always ensure the use of appropriately matched air tools with your Mastercraft
®
Air Compressor. Be sure
that the air compressor being used can supply the appropriate volume, pressure and delivery rate of air to
the tool(s) without running continuously. Using tools or combinations of tools that, together or separately,
require more than the air compressor can deliver will void the air compressor guarantee/warranty.
model no. 058-1893-2 | contact us 1-800-689-9928
To Next Page
Loading...
