MasterCraft 058-8122-6

IMPORTANT INFORMATION
12
AIR-POWERED PIN NAILER 058-8122-6
Air system
• Always use clean, dry, regulated, compressed air at 4 to 7 bar (60 to 100 PSI).
• Do not exceed the maximum or minimum pressures. Operating the tool at the wrong pressure
(too low or too high) will cause excessive noise or rapid wear.
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Keep hands and other parts of the body away from the tool’s discharge and
working areas when connecting the air supply. Failure to comply could lead to
serious injury or loss of life.
No. Description No. Description
1 Mastercraft
®
Air-powered Pin Nailer 6 Regulator (0 to 8.5 bar)
2 Quick connector 7 Filter
3 Quick coupler 8 Cut-off valve
4Air hose 9Air compressor
5 Lubricator
2
5
7
1
3
3
6
8
9
4
MC-588122-02