SAFETY GUIDELINES
7
AIR-POWERED PIN NAILER 058-8122-6
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
Do not allow inexperienced or untrained individuals to operate an Air-
powered Pin Nailer or any other air-powered tool.
• Keep hands and other parts of the body away from the firing head during
use. Keep hands, feet, and all other parts of the body at least 8"
(20 cm)
away from the firing head. Nails or objects in the workpiece can cause
serious injury if they are deflected by the workpiece or if they are driven
away from the point of entry.
• Do not overload the tool. Allow the tool to operate at its optimum speed for
maximum efficiency.
• Locate the compressor in a well-ventilated area for cooling, at a minimum of
12" (31 cm) away from the nearest wall.
• Protect the air hose and the power cord from damage and puncture. Inspect
them for weak or worn spots every week, and replace them if necessary.
• Always wear hearing protection when using the air compressor. Failure to do
so may result in hearing loss.
• Do not carry the compressor while it is running.
• Do not operate the compressor if it is not in a stable position.
• Do not operate the compressor on a rooftop or in an elevated position that
could allow the unit to fall or be tipped over.
• Always replace a damaged gauge before operating the unit again.
To Next Page
Loading...
Need help?
General
