MasterCraft 058-8122-6 User Manual

SAFETY GUIDELINES
9
AIR-POWERED PIN NAILER 058-8122-6
Note: Recycle unwanted materials rather than disposing of them as waste. Sort the tools, hoses, and
packaging in specific categories and take to the local recycling centre or dispose of them in an
environmentally safe way.
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Disconnect the tool from the air supply and turn off the
compressor before performing any maintenance, loading or
changing nails, when the tool is not in use, when it is being
handed to another person, and when it is left
unattended. Failure to comply may result in moderate injury
or damage to equipment.
• Use safety goggles and ear protection:
Wear safety glasses with side shields when operating the
tool and verify that others in the work area are also wearing
safety glasses. Safety glasses must conform to American
National Standards Institute (ANSI Z87.1) requirements and
must provide protection from flying particles from the front
and the sides.
Air-powered tools are loud and the sound can cause hearing
damage. Always wear ear protection to help prevent hearing
damage and loss. Failure to comply may result in moderate
injury.
MC-OM-21
MC-OM-01

MasterCraft 058-8122-6 Specifications

General

Brand	MasterCraft
Model	058-8122-6
Category	Nail Gun
Language	English