MasterCraft 058-8691-0 User Manual

OPERATING INSTRUCTIONS
16
AIR-POWERED BRAD NAILER 058-8691-0
3. Insert a strip of nails (1) into the
magazine. After ensuring that the points
of the nails are facing down, close the
magazine. The tool is now ready for use
(fig C) . (see nail type icon on
page 14)
4. Plug in compressor, turn it on, set the
pressure regulator to 90 PSI, attach one
end of the air hose to the compressor
and the other end of the air hose (1) to
the tool (2). Use plumber’s tape to
prevent air leaks
(fig D) . page
11 (wood density chart)
5. Test the driving depth of the tool against
a sample piece of wood by pressing the
trigger (1) before working on the
workpiece. If the nails are being driven
too deep or not deep enough, adjust the
regulator in the air supply in order to
provide more or less air pressure, as
required
(fig E) .
MC-588691-05
fig C
1
MC-588691-06
fig D
2
1
MC-588691-07
fig E
1

MasterCraft 058-8691-0 Specifications

General

Brand	MasterCraft
Model	058-8691-0
Category	Nail Gun
Language	English