OPERATING INSTRUCTIONS
15
AIR-POWERED BRAD NAILER 058-8691-0
Loading nails
1. Disconnect the tool (1) from the air
supply (2)
(fig A)
.
2. Hold the Air-powered Brad Nailer firmly
with one hand, and use the other hand
to press the latch (1) on the magazine
(2) and slide it back
(fig B)
.
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Disconnect the tool from the compressed air source before loading nails.
• Do not point the tool towards the operator or other people while changing
nails.
• Do not hold the tool with the trigger pressed while changing the nails.
Failure to comply will result in serious injury or loss of life.
MC-588691-03
fig A
2
1
MC-588691-04
fig B
1
2