MAINTENANCE
21
AIR-POWERED BRAD NAILER 058-8691-0
•Air-operated tools must be inspected periodically and worn or broken parts must be replaced
in order to keep tools operating safely and efficiently.
• Inspect and replace worn or damaged O-rings, seals, etc. Tighten all screws and caps
frequently in order to help prevent personal injury.
• Inspect the trigger, spring, and safety mechanism for free movement on a regular basis in
order to ensure that the safety system is fully functional. Verify that no parts are loose or
missing and no parts are sticking or jammed.
• Keep the magazine and the safety stand of the tool clean and free of any dirt or abrasive
particles.
Note: When temperatures are below freezing, keep the tools warm using any safe, convenient
method.
To Next Page
Loading...
Need help?
General
