MasterCraft 058-8691-0 User Manual

SAFETY GUIDELINES
8
AIR-POWERED BRAD NAILER 058-8691-0
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Carry the tool by the handle only. Do not carry the tool with a finger on the
trigger. Do not carry the tool by the hose, magazine or any other part.
• Keep proper footing at all times in order to ensure correct balance.
• Do not use a tool that is leaking air, with missing or damaged parts, or that
requires repairs. Verify that all screws are securely tightened.
• For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and spring.
• Keep the work area clean. A cluttered or dirty workbench may lead to an
accident. Floors should be kept clear.
• This tool is not a toy. Use it with caution.
• Handling and storage of oil: Use the tool with adequate ventilation. Avoid
contact of oil with eyes, skin, and clothing. Avoid breathing spray or mist.
Store in a tightly closed container in a cool, dry, well-ventilated area free
from incompatible substances.
• Tripping hazard: The air hose may become a tripping hazard when it is
placed in the work area.
• Do not use the tool near or below the freezing condition, as doing so may
cause tool failure.
• Do not store the tool in a freezing environment to prevent ice formation on
the operating valves of the tool, as doing so may cause tool failure.
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Disconnect tool from the air supply before loading or
changing nails in order to prevent a nail from being fired
during loading. Failure to comply may result in moderate
injury or damage to equipment.
MC-OM-21

MasterCraft 058-8691-0 Specifications

General

Brand	MasterCraft
Model	058-8691-0
Category	Nail Gun
Language	English