MasterCraft 068-1575-6 User Manual

12
ASSEMBLY INSTRUCTIONS / OPERATION / MAINTENANCE
model no. 068-1575-6 I contact us 1-800-689-9928
ASSEMBLY INSTRUCTIONS
Before attaching the top drawer, extend the slides first. There are two black release levers on
each side of inner rails. Pull one up and push the other one down until you see a silver dot.
•
•
Repeat the same procedure as the other drawers to attach the top drawer to the slides. The
cabinet is ready for use.
Push down – side
Pull up – side
DRAWER REMOVAL
DRAWER REPLACEMENT
Extend the drawer slides from the tool chest or cabinet.
Insert the brackets on each side of the drawer into the slots
in the slides, being careful that they are properly positioned.
Once properly inserted, completely close the drawer to set
the slides in their proper positions.
Push down - one side
Pull up - other side
Pull the drawer out until it is extended to the maximum.
There are two black release levers: one on each side of
the drawer. Pull one up while you push the other one
down simultaneously. At the same time, pull the drawer
out of the drawer slides.
•
Place the drawer liners (21) into each drawer of the cabinet.
21

MasterCraft 068-1575-6 Specifications

General

Brand	MasterCraft
Model	068-1575-6
Category	Indoor Furnishing
Language	English