MasterCraft 068-1575-6

Need help?

Do you have a question about the MasterCraft 068-1575-6 and is the answer not in the manual?

Summary

Safety Information

Weight Limits

Maximum load for the cabinet, each drawer, and the rubberwood top.

Assembly Instructions

Tools Required for Assembly

List of tools needed for product assembly, including hex wrench and screwdriver.

Step 1: Attach Side and Bottom Panels

Connect the side panels to the bottom panel using hex socket head screws.

Step 2: Attach Back Top Beam and Back Panels

Connect the back top beam and back panels to the cabinet structure.

Step 3: Install Adjustable Feet

Attach adjustable feet to the bottom panel and secure them with screws.

Step 4: Attach Front Top Beam

Attach the front top beam to the side panels and bottom panel using screws.

Step 5: Install Drawer Slides

Install the left and right drawer slides onto the side panels of the cabinet.

Step 6: Attach Rubberwood Top

Secure the rubberwood top to the cabinet using hex socket head screws.

Step 7: Secure Cabinet to Wall

Attach the cabinet to the wall using tapping bolts for safety.

Step 8: Assemble Drawers

Assemble drawer panels, side panels, and back panel using clips and screws.

Step 9: Assemble Drawers (Continued)

Fasten drawer front panels and side panels using tapping bolts, avoiding power tools.

Step 10: Attach Drawers Bottom-Up

Slide drawer side panels onto upright clips and secure drawers with bolts.

Drawer Removal

Instructions on how to remove a drawer using release levers.

Drawer Replacement

Procedure to reinsert and secure drawers back into the cabinet slides.

Summary

Safety Information

Weight Limits

Maximum load for the cabinet, each drawer, and the rubberwood top.

Assembly Instructions

Tools Required for Assembly

List of tools needed for product assembly, including hex wrench and screwdriver.

Step 1: Attach Side and Bottom Panels

Connect the side panels to the bottom panel using hex socket head screws.

Step 2: Attach Back Top Beam and Back Panels

Connect the back top beam and back panels to the cabinet structure.

Step 3: Install Adjustable Feet

Attach adjustable feet to the bottom panel and secure them with screws.

Step 4: Attach Front Top Beam

Attach the front top beam to the side panels and bottom panel using screws.

Step 5: Install Drawer Slides

Install the left and right drawer slides onto the side panels of the cabinet.

Step 6: Attach Rubberwood Top

Secure the rubberwood top to the cabinet using hex socket head screws.

Step 7: Secure Cabinet to Wall

Attach the cabinet to the wall using tapping bolts for safety.

Step 8: Assemble Drawers

Assemble drawer panels, side panels, and back panel using clips and screws.

Step 9: Assemble Drawers (Continued)

Fasten drawer front panels and side panels using tapping bolts, avoiding power tools.

Step 10: Attach Drawers Bottom-Up

Slide drawer side panels onto upright clips and secure drawers with bolts.

Drawer Removal

Instructions on how to remove a drawer using release levers.

Drawer Replacement

Procedure to reinsert and secure drawers back into the cabinet slides.

This document is an instruction manual for the Mastercraft 28" (71 cm) Base Cabinet with Drawers, model no. 068-1575-6. It provides comprehensive information regarding the product's assembly, safety guidelines, maintenance, and warranty.

Function Description:

The Mastercraft 28" (71 cm) Base Cabinet with Drawers is a storage unit designed for indoor use. It features multiple drawers for organizing tools and other items, and a rubberwood top that can also serve as a workspace. The cabinet is part of a modular storage system, coordinating with other Mastercraft units to create various storage solutions. It is intended for personal, non-commercial, and non-industrial usage. The cabinet is designed to be secured to a wall using anti-tip hardware for enhanced safety and stability.

Important Technical Specifications:

Model Number: 068-1575-6
Dimensions: 28" (71 cm) Base Cabinet
Maximum Load Capacity: 430 lb (195 kg)
Maximum Load per Drawer: 70 lb (32 kg)
Maximum Load for Rubberwood Top: 150 lb (68 kg)
Components:
- Right side panel (1)
- Lock (001-010) (2)
- Front top beam (3)
- Right slide (4)
- Top drawer front panel (5)
- Middle drawer front panel (6)
- Drawer handle (7)
- Bottom drawer front panel (8)
- M4 x 6 cross-head pan head tapping bolt (9)
- Key (001-010) (10)
- M4 x 5 cross-head bolt (11)
- M6 x 16 hex socket head screw (12)
- Adjustable foot (13)
- Left slide (14)
- Bottom panel (15)
- Left side panel (16)
- Drawer panel (17)
- Back panel (18)
- M6 x 40 hex tapping bolt (19)
- Back top beam (20)
- Drawer liner (21)
- Rubberwood top (22)
- Hex wrench (23)
Tools Required for Assembly (provided or not provided):
- Hex Wrench (23) (provided)
- Cross-head Screwdriver (not included; magnetic is preferable)
- Power Drill (not included)
- Measuring Tape (not included)

Usage Features:

Assembly: The manual provides detailed, step-by-step instructions for assembly, including attaching side and bottom panels, back top beam and back panels, adjustable feet, front top beam, slides, rubberwood top, and securing the cabinet to a wall. Drawer assembly instructions are also provided.
Drawer Operation: Drawers should be filled from the bottom up to prevent the cabinet from becoming top-heavy and tipping over. Only one drawer should be opened at a time.
Security: The cabinet includes a lock and keys for securing the contents of the drawers. It is recommended to close and lock the drawers before moving the cabinet.
Stability: The product should always be kept on level surfaces. Anti-tip hardware is provided to secure the cabinet to a wall, which is highly recommended for safety.
Drawer Removal and Replacement: Instructions are provided for removing and replacing drawers, which involves manipulating black release levers on the inner rails of the slides.

Maintenance Features:

Lubrication: The slides should be lubricated twice a year with a spray lubricant or light-duty oil to ensure smooth operation.
Cleaning: Surfaces can be periodically cleaned with a soft rag and water. Grease and oil can be removed using most standard cleaning fluids; a nonflammable cleaning fluid is recommended for safety.
Tightness Check: All nuts and bolts should be checked periodically for tightness and tightened as required to maintain structural integrity.

Safety Information:

The manual emphasizes several critical safety points:

Intended for indoor use only; not for commercial or industrial use.
Keep on level surfaces to prevent tipping.
Assembly and maintenance must be carried out by adults only.
Requires at least two people to move, assemble, or install to prevent injury or damage.
Check and tighten nuts and bolts periodically.
Close and lock drawers before moving.
Fill from the bottom drawer up to maintain stability.
Secure to the wall with anti-tip hardware.
DO NOT alter the product in any manner.
DO NOT leave children unattended near the product.
DO NOT open more than one drawer at a time.
DO NOT step or climb on the product or drawers.
Adhere to maximum weight limits for the cabinet and individual drawers.
Wear gloves during assembly.
Use a soft mat or cardboard during assembly to prevent scratches.
DO NOT use power tools for certain steps of drawer assembly to prevent product damage; a magnetic cross-head screwdriver is preferred.

Warranty:

The product comes with a 1-year limited warranty from the date of original retail purchase against defects in materials and workmanship. The warranty covers repair or replacement at the manufacturer's option, including labor costs. Specific conditions and limitations apply, such as requiring a sales receipt, excluding damage from abuse, misuse, improper maintenance, normal wear and tear, or unauthorized repairs. The warranty is non-transferable and applies only to the original purchaser. It does not cover industrial or commercial use.