12
MAINTENANCE
BEFORE EACH USE
1. Check for damaged, missing, or worn parts.
2. If abnormal vibration or noise occurs, turn the tool off immediately and have the problem corrected
before further use.
3. Unplug the tool from power source before cleaning or performing any maintenance. Using
compressed air may be the most effective cleaning method. Always wear safety goggles when
cleaning tools using compressed air.
MAINTENANCE
WARNING!
• Do not allow brake fluids, gasoline and petroleum-based products, penetrating oil, etc. come into contact
with plastic parts. These substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard or
cause damage to the product.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
To Next Page
Loading...
