7
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
SAFETY GUIDELINES
Safety guidelines for cordless drill/driver
•
Hold power tools by the insulated gripping surfaces when performing an operation where the tool
may contact hidden wiring or its own cord. Contact with a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an electric shock.
•
When working with the power tool, always hold it rmly with both hands and provide for a secure
stance. The power tool is guided more securely with both hands.
•
Keep the cord and charger from heat to prevent damage to the housing or internal parts.
•
Secure the workpiece. Clamping devices or a vise will hold the workpiece in place more effectively
than your hand can.
•
Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with plastic parts.
These materials contain chemicals that can damage, weaken, or destroy plastic.
•
Always wait until the machine has come to a complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
•
Before performing any kind of work on the machine (e.g., maintenance, tool change, etc.) or
when transporting and storing the tool, always set the direction-of-rotation switch to the centre
(locked) position. Unintentional activation of the On/Off switch may result in personal injury.
•
Do not open the battery. There is a risk of a short circuit.
•
Protect the battery from heat and re. There is a risk of explosion.
•
Wear ear protectors when using the drill/driver. Exposure to noise can cause hearing loss.
•
Use protective gloves when removing the bit from the tool, or rst allow the bit to cool down. The
bit may be hot after prolonged use.
•
Use protective gloves when operating the tool. Protective gloves can help to keep you from being
burnt or injured.
•
Keep your hands away from the motor-housing vents. Hot gas comes from the vents during
operation.
•
Release the trigger immediately when a screw is tightened to avoid breaking the screw.
•
For best results, your battery tool should be charged in a location where the temperature is more
than 0°C (32°F) but less that 40°C (104°F). Do not store outside or in vehicles.
Contents
Cordless Drill/Driver, 2 double-ended bits, and Instruction Manual
To Next Page
Loading...
Need help?
General
