6
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
SAFETY GUIDELINES
Power tool use and care
•
Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and more safely at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
•
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
•
Use the power tool, accessories, tool bits, etc., in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Battery tool use and care
•
Recharge only with the charger specied by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of re when used with another battery pack.
•
Use power tools only with specically designated battery packs. The use of any other battery pack
may create a risk of injury and re.
•
When the battery pack is not in use, keep it away from other metal objects, such as paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a re.
•
Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact occurs,
ush with water. If liquid comes into contact with the eyes, seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
•
Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
To Next Page
Loading...
Need help?
General
