7
20V max* LITHIUM-ION COMPACT CORDLESS IMPACT WRENCH - 054-3121-6
SAFETY GUIDELINES
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If liquid contacts eyes, also seek medical
help. Liquid ejected from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Safety guidelines for cordless impact wrench
• Hold power tools by the insulated gripping surfaces when performing an operation where
the tool may contact hidden wiring or its own cord. Contact with a “live” wire may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to support and secure the workpiece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
• Do not drill, fasten or break into existing walls or other blind areas where electrical wiring
may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding the worksite.
• Always wear safety goggles or eye protection when using this tool.
• Bits, sockets and tools get hot during operation. Wear gloves when touching them after use.
• Wear ear protectors when using the tool for extended periods. Prolonged exposure to high
intensity noise can cause hearing loss.
• Use thick, cushioned gloves and limit the exposure time by taking frequent rest periods.
Vibration caused by the impact wrench action may be harmful to your hands and arms.
• Secure the material being fastened. Never hold it in your hand or across your legs. Unstable
support can cause loss of control and injury.
• Avoid accidental starting. Be sure that the forward/centre-lock/reverse switch is in the “off”
(centre) position before inserting the battery pack. Carrying appliances with your nger on the switch
or inserting the battery pack into an appliance with the switch on invites accidents.
• Remove the battery pack before changing accessories. Accidental starting may occur because
battery appliances with a battery inserted are in the operative condition.
• Be prepared for a reaction torque when “seating” or removing a fastener. The tool housing
may tend to twist in the opposite direction of the bit rotation when “seating” or removing a fastener,
depending on the torque setting of the tool.
• Do not use worn or damaged impact sockets and accessories. When installing an accessory,
insert the impact socket well onto the anvil. Be sure that the anvil has locked onto the socket correctly.
• Do not run the tool while carrying it at your side. A spinning bit could become entangled with
clothing and injury may result.
To Next Page
Loading...
Need help?
General
