8
20V max* LITHIUM-ION COMPACT CORDLESS IMPACT WRENCH - 054-3121-6
SAFETY GUIDELINES
• Place the tool onto the fastener only when the tool is switched off. Rotating wrench tools
can slide off of the fastener.
• Be careful when driving long screws. There is a risk of the impact wrench sliding off the
fastener head, depending on the type of socket or bit used. First test the run-down of a fastener and
pay attention during the driving process to ensure that you do not injure yourself if the tool bit or
socket slides off of the fastener.
• The label on your tool may include the following symbols. The symbols and their
denitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
Contents
Cordless Impact Wrench, Instruction Manual
WARNING!
Remove the Cordless Impact Wrench from the package, and examine it carefully. Do not
discard the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the Cordless Impact Wrench is missing or damaged, do not attach the battery
pack to the tool or use the tool until the part has been repaired or replaced. Failure to heed
this warning could result in serious injury.
To Next Page
Loading...
Need help?
General
