Storing (Fig. 19 and 20)
Store the planer in a cool dry place. Clean and
lubricate prior to storage.
Apply a light coat of oil to the knives in order to
protect them from moisture. Be sure to clean the
knives after storing.
Place the knife depth alignment tool and the
wrenches inside the storage compartment (1) in
the cover.
Fold up the power cord (2) and place it on top of the
cutter head assembly at the rear of the thickness
planer.
Fold the in-feed and out-feed rollers up when the
planer is not in use.
VIII. Maintenance (continued)
22
Fig. 20
Fig. 19
1
2
To Next Page
