MasterCraft LASER DISTANCE FINDER/MEASURING TOOL - Safety Guidelines; General Safety and Hazard Warnings; Laser Beam Safety; Device Familiarization and Parts Overview

7
LASER DISTANCE FINDER/MEASURING TOOL - 057-4585-0
8
LASER DISTANCE FINDER/MEASURING TOOL - 057-4585-0
• Do not attempt to modify the performance of this laser device in any way. This may result in
a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the laser distance finder/measuring tool. If
unqualified persons attempt to repair this product, serious injury may occur. Any repair
required on this laser product should be performed only by qualified service personnel.
• Do not operate the tool in combustible areas, such as in the presence of flammable liquids,
gases, or dust.
• Use of other accessories that have been designed for use with other laser tools could result
in serious injury.
• Keep batteries out of reach of children.
• Do not direct the laser distance finder/measuring tool towards the sun or other sources of
bright light. This may cause an Error reading or inaccurate measurements.
• Do not use the laser distance finder/measuring tool as a leveling tool.
• Do not operate the laser tool in wet, dusty, sandy, or other adverse environments. Such
conditions may damage inner components and affect measuring accuracy.
• When the laser distance finder/measuring tool is brought into a warm environment from very
cold conditions, or vice versa, allow it to come to the surrounding temperature before use.
• Measuring errors can occur when measuring toward colorless liquids (e.g., water), clean
glass, Styrofoam, or similar translucent or low-density materials.
• High-gloss surfaces will deflect the laser beam and result in Error measurements.
• Very bright surroundings combined with a very low reflecting surface will reduce the
measuring range and accuracy.
• Do not immerse the tool in water. Wipe off dirt with a damp, soft cloth. Do not use aggressive
cleaning agents or solutions. Treat the optical surfaces with the same care that you would
apply to eye glasses or cameras.
• The accuracy of the tool must be checked before use after it has been dropped or subjected
to other mechanical stresses.
Know your laser distance finder/measuring tool
1
2
3
6
5
4
7
No. Description No. Description
1 LCD display 5 Battery compartment
2 Keyboard 6 Laser-receiving lens
3 Positioning pin 7 Laser-exit aperture
4 1/4" tripod screw
SAFETY GUIDELINES
DESCRIPTION