model no. 054-7281-0 | contact us 1-800-689-9928
model no. 054-7281-0 | contact us 1-800-689-9928
16
model no. 054-7281-0 | contact us 1-800-689-9928
APPLICATION
Warning: The saw teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Function Accessory Name Application
Sawing Flush-cutting blade
Wood, plastic, fibreglass, nails,
non-ferrous metals, thin sheet metal,
hardened fillers
Sawing Segmented saw blade
Thin wood, plastic, fibreglass, non-ferrous
metals, thin sheet metal, hardened fillers,
window glazing
Sanding Detail sanding base Wood, plastic, hardened fillers
Removing grout
Diamond coated
segmented saw blade
Ceramic and stone tile, backerboard
Scraping Flexible scraping blade
Old paint, hardened adhesives, caulk,
carpet
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.
NOTE: When plunging and sawing, use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade, rotate
it and retighten firmly.
Cut/sand with constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
