97
/
2023 OWNER’S MANUAL
Custom Surf
Custom Surf provides access to additional, in-depth wave settings.
From this menu, you may adjust ballast fill levels, tab positions,
wave position, and ZeroO cruise control. You may also store
presets, create custom profiles, manage/select profiles, and
adjust sound settings. With its deep customization features, this
menu is designed for experienced wakesurfing enthusiasts looking
to craft a wave that perfectly suits their unique preferences.
To access the Custom Surf menu, select CUSTOM SURF from the
toggle in the top right hand corner of the Surf Mode screen.
Creating a New Surf Profile
Both Rapid Surf and Custom Surf allow you to create your own
custom surf profile with individualized tab, ballast, and
speed settings. The profile may then be stored for later use.
To create a custom surf profile, follow the instructions below.
1. Select from the panel near the top of the screen.
2. The following menu will appear onscreen. From this menu, you may
adjust ballast fill levels, tab deployment, speed, and cruise control
(on/o). You may also tap SURF LEFT or SURF RIGHT to set the
wave position. (Tapping a ballast zone or surf tab will take you to a
dedicated ballast or tab adjustment screen.)
3. When you are satisfied with your settings, touch the NEXT button.
Doing so will save the adjustments to your profile and take you to
the next step in the profile creation process.
To Next Page
Loading...
Need help?
General
