99
/
2023 OWNER’S MANUAL
Wake Mode
Wake Mode is intended solely for wakeboarding. Like Surf Mode,
it enables control of surf tabs and ballast zones, allowing the user
to influence the shape and intensity of the wake generated by the
boat’s WSDs. Wake Mode includes 3 stock wake profiles: Beginner,
Intermediate, and Advanced. MasterCraft recommends that you
select the profile corresponding to your level of ability.
• Beginner - Designed for new riders who are still learning to
wakeboard. Allows the user to get comfortable wakeboarding at
slower speeds. The user may begin learning surface tricks and
wake crossings. Recommended line length: 55-60’.
• Intermediate - Designed for moderately experienced riders
learning their first wake-to-wake jumps, basic inverts, and spins.
Recommended line length: 55-65’.
• Advanced - Designed for highly experienced riders seeking
bigger airs for advanced tricks.
Recommended line length: 65-75’
All 3 stock profiles are accessible from the Wake Mode
home screen. To activate a stock profile, tap the one you wish
to use. The button will turn light gray, indicating that the profile
is active.
Custom Wake Profiles
In addition to letting the user select a stock profile, Wake Mode
also allows for the creation of custom wakeboard profiles.
Once created, these profiles can be saved and stored for use at
any time. To build a profile, complete the following series of steps.
1. Select from the panel near the top of the menu. The following
screen will appear. From this screen, you may adjust and set tab,
ballast, and cruise control settings. Selecting an individual tab or
ballast zone will take you to a dedicated tab/ballast page.
2. When you are satisfied with your settings, touch the NEXT button.
Doing so will save any adjustments made to your profile and take
you to the next step in the profile creation process.
To Next Page
Loading...
