Touch Commands Description
GPS Status - Displays the location of
the satellites.
Position Format Selection - Feature
allows you to define the amount of detail to
display for longitude and latitude information
on the GPS map.
Time Setup Parameters – This is used to select correct time zone
and clock mode for either 12-hour or 24-hour time formats. You can
also enable DST (Daylight Savings Time) by using the PLUS/MINUS
soft keys to select the box.
FACTORY SETTINGS
On the Settings Menu, touch the
Factory Settings touch command to
access the Factory Settings screen.
A Dealer code is required to access this
screen.
To Next Page
Loading...