MasterCraft X46

New User Profile
A new rider profile can be set-up using the HV700 Touch. To create
a new profile, press the Profile Quick Access Key.
New User Profile Display Instructions
Touch [Add New] to create a
new profile.
Type a name for the new profile
using the touch keypad, and
touch [Done].
Touch [Next] to continue.
New User Profile Display Instructions
Touch the [Up] or the [Down]
arrow to Set the speed for
this profile. Touch [Next] to
continue.
Set the tabs by either sliding
your finger on the ridged area
or by touching the [Up] and
[Down] arrows. Touch [Next] to
continue.
Set the ballast tanks by touch-
ing and sliding your finger up
the tank area or by touching
the [Up] and [Down] arrows
alongside the tank area. Touch
[Next] to continue.
On the Save screen, review the
Profile settings. Touch [Save]
to save the profile and return
to the Profiles screen with the
new profile displayed
(continued on next page)