EasyManuals Logo

MasterCraft X46 User Manual

MasterCraft X46
438 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #187 background imageLoading...
Page #187 background image
2016 OWNERS MANUAL / 0187
a dead battery could cause boaters to become stranded.
N = Attitude Adjustment Plate and NXT Wake Shaping Devices.
The Attitude Adjustment Plate has been designed to improve the
overall attitude of a boat. If used properly, the plate will improve the
ride, reduce drag, increase speed and improve the fuel efficiency of
the boat.
The plate is mounted with the actuator on the transom of the boat.
When the plate is lowered, the water flow is redirected, creating an
upward force at the stern of the boat. When the stern rises, the bow
will lower.
Since the actuator that maneuvers the plate is electromechanical,
it provides an immediate response at the touch of the switch. The
switch adjustments are based on the position of the bow, and are
designed in that manner to minimize the guesswork while underway.
Press the switch DOWN to lower the bow. Press the switch UP to
raise the bow.
Since our models have different weights, lengths, speed and
performance, it will take some practice for the operator to
understand how the boat reacts with the attitude adjustment plate
installed. The plates will allow your boat to get on plane faster and
continue planing at lower speeds. This will improve visibility and the
overall safety of the boat.
starting an outing, and removed at the conclusion. This is intended
to prevent theft or unapproved use of the boat.
The process for starting the boat is:
Insert the key and turn to the right (starboard). This turns ON the
electrical system and prompts the battery(ies) to provide power.
Turn the blower ON and allow it to run for at least four (4)
minutes before starting the engine.
Momentarily press the ENGINE START-STOP button.
Momentarily press the ENGINE START-STOP button to turn OFF
the engine.
NOTE: This button affects only the engine. The electrical
system will continue to operate as long as the key is turned. If
the key is left turned on after the outing, it will eventually run
down the battery(ies) and the engine, and all systems will not
start as a result.
At the conclusion of the outing, turn the key OFF and remove from the
key slot. Also, shut OFF the battery switch. Doing so will ensure that
you have turned OFF the electrical system, and prevent others from
starting or running the boat. Note that shutting OFF the key but failing
to also turn OFF the battery switch will result in the electrical charge
to the battery or batteries continuing to drain. Such drain will, in time,
render the batteries unable to start the engine or run any electrical
components on the boat. As noted elsewhere in this Owner’s Manual,

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft X46 and is the answer not in the manual?

MasterCraft X46 Specifications

General IconGeneral
Beam102"
Draft30"
Seating Capacity15 persons
EngineIlmor
Ballast Weight3, 000 lbs
Wakeboard TowerZFT4
Stereo SystemFusion

Related product manuals