MasterflexPortable Sampling Drive Operating Manual
!
WARNING: Tubing breakage may result in fluid being sprayed from
the pump. Use appropriate measures to protect the operator and
equipment.
For optimum performance and ease of use, the EASY-LOAD or PTFE Tubing
Pump Head is recommended.
NOTE: OPTIMUM STARTING PERFORMANCE
e greatest load seen by the drive is starting a new piece of tubing. For optimum
performance in starting new tubing, turn on the drive mechanism and activate the
“MAX” switch for 30 seconds. After starting the tubing, release the MAX switch
and adjust the speed of the pump using the speed control knob.
Setup
(Continued)
2-2
Section 2
Setup
To Next Page
Loading...
