Page 16
INSTALLING & CLEANING FILTERS
2. Unlock the filter door by sliding the lock tab
UP to the unlocked position and pull the
door out (Fig. 2 & 3).
Fig. 2 Fig. 3
3. Remove the HEPA filter cartridge from the
vacuum (Fig.4).
Fig. 4
4. Clean filter by brushing dirt off. For optimal
performance a new filter is recommended
(Fig.5).
Fig. 5
5. Install the cleaned or new filter (Fig. 6).
Fig. 6
6.
Insert the filter door tabs into the upper slots
and lock the filter door into place (Fig. 7 & 8).
Fig. 7 Fig. 8
To Next Page
Loading...
