MasterForce 241-0706 User Manual

6 ½” PLUNGE CUT CIRCULAR SAW
241-0706
OPERATOR’S MANUAL
To Reduce The Risk Of Injury, User Must Read And
Und
erstand Operator’s Manual. Save These Instructions For Future Reference.
CAUTION:
!
For questions/comments, technical assistance or repair parts –
Please call toll free: 1-866-349-8665 (M–F 9am–5pm EST)

MasterForce 241-0706 Specifications

General

Type	Circular Saw
Blade Size	7-1/4 inches
Blade Diameter	7-1/4 inches
Max Cutting Depth at 90°	2-7/16 inches
Motor	15 Amp
Max Cutting Depth at 45°	1-3/4 in
No-Load Speed	5500 RPM

Summary

GENERAL SAFETY WARNINGS

EYE, EAR & LUNG PROTECTION

Essential personal protective equipment (PPE) for safe operation, including eye, ear, and respiratory protection.

ELECTRICAL SAFETY

Guidelines for safe use of electrical power, preventing hazards like shock and fire.

POWER TOOL SAFETY

SPECIFIC SAFETY RULES

Kickback Prevention and Blade Safety

Understanding kickback causes and how to prevent it, plus safe blade handling.

KNOW YOUR PLUNGE CUT CIRCULAR SAW

ASSEMBLY AND OPERATING

Installing the Blade

Step-by-step instructions for safely installing or replacing the saw blade.

Plunge Cutting

Detailed steps for performing plunge cuts safely and accurately.

General Cutting

Standard procedures for making general cuts with the saw.

Bevel Cutting

How to adjust the saw for angled cuts and perform them correctly.

Setting Depth Adjustment

Assembling the Guide Track

Cutting Using the Guide Track

MAINTENANCE

EXPLODED VIEW

PARTS LIST