To Next PageTo Next Page
Need help?Do you have a question about the MasterForce 709-3954 and is the answer not in the manual?
Ensures guards are in place, keys removed, and work area is clean and well-lit.
Covers alertness, environment, child safety, using the right tool, and proper attire.
Includes not forcing the tool, proper blade usage, and tool care.
Addresses unintentional starting, accessories, blade types, and positioning.
Focuses on keeping clear of moving parts and using caution during cuts.
Details correct blade checks, water reservoir use, and feed direction.
Covers grounding, plug modification, extension cords, and wet plug scenarios.
Specifies use of outdoor-rated, properly gauged, and UL-listed extension cords.
Advises on potential exposure to chemicals causing cancer or birth defects.
Details the saw's features for cutting various tiles up to 1-1/8 inch thick.
Lists input, speed, output, blade size, arbor, voltage, and cut depth.
Instructions for removing packing materials and checking for damage.
Steps for safely removing the table, baffle, and installing the diamond blade.
Guide to attaching the blade guard support and guard assembly.
Procedure for placing and securing the rip guide for straight cuts.
Instructions for positioning the angle guide on the rip guide for angled cuts.
Ensures the saw is unplugged, water reservoir is filled, and table is secured.
Connects the saw to a GFCI outlet and creates a drip loop for safety.
Details on setting the rip guide and feeding material for straight cuts.
Guide for setting table angles (15-45°) and using guides for precise cuts.
Information on utilizing the bench stop for stable cutting.
Covers cleaning, wiping surfaces, checking blades, and cord storage.
Guidelines for inspecting, selecting, and using diamond blades correctly.
Steps to address saw overheating, including checking ventilation.
Covers checks for power cord, outlet, and extension cord functionality.
General| Type | Circular Saw |
|---|---|
| Blade Size | 7-1/4 inches |
| Motor | Electric |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
| Bevel Capacity | 0-56 degrees |
| Amperage | 15 A |
| Dust Port Size | 1-1/2 inches |
