Page 11
MAINTENANCE
When servicing, use
only identical replacement parts. Use of any
other parts may create a hazard or cause
product damage.
Before inspecting, cleaning, or servicing the
machine, shut off motor, wait for all moving
parts to stop, and disconnect battery. Failure
to follow these instructions can result in
serious personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust,
lubricant, grease, etc.
Do not at any time
let brake fuids, gasoline, petroleum-based
products, penetrating lubricants, etc., come
in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which
may result in serious personal injury.
You can often make adjustments and repairs
described here. For other repairs, have
the power head serviced by an authorized
service dealer.
CLEANING THE PRODUCT
• Stop the motor and remove the battery.
• Clean dirt and debris from the power head
using a damp cloth with a mild detergent.
Note: Do not use any strong detergents on
the plastic housing or the handle. They can
be damaged by certain aromatic oils such
as pine and lemon, and by solvents such as
kerosene.
STORING THE PRODUCT
• Clean all foreign material from the product.
• Store it in a well-ventilated place that is
inaccessible to children.
• Keep away from corrosive agents such as
garden chemicals and de-icing salts.
Do not store the
Edger in sunlight, in an excessively warm
place, or near a furnace. The battery life will
be shortened.
WARNING
WARNING
WARNING
To Next Page
Loading...