MasterForce FLEX CONNECT - Page 6

Page 5
and re.
• Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of re when used with another
battery pack.
• Use only with Masterforce Batteries:
267-3313, BAB726, BAB727, BAB728,
BAB729 and other BAB series batteries.
• Use only Masterforce Charger: 267-3314,
CAB809 or other CAB series.
• When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws, or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause a re.
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
• Do not use a battery pack or appliance
that is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion, or risk of injury.
• Do not expose a battery pack or appliance
to re or excessive temperature. Exposure
to fire or temperature above 265 °F (130
°C) may cause an explosion.
• Do not dispose of the batteries in a fire.
The cells may explode. Check with local
codes for possible special disposal
instructions.
• Do not open or mutilate the batteries.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
• Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and
keys. The battery or conductor may
overheat and cause burns.
• Follow all charging instructions and do
not charge the battery pack or appliance
outside of the temperature range specied
in the instructions. Charging improperly or
at temperatures outside of the specified
range may damage the battery and
increase the risk of re.
SAFETY INSTRUCTIONS
• Disconnect the battery pack from
the appliance before making any
adjustments, changing accessories, or
storing appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
• Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
• Keep guards in place and in working order.
• Keep hands and feet away from cutting
area.
• Keep blades sharp.
The recommended ambient temperature
range:
Condition Temperature
Product
storage
32°F (0°C) - 113°F (45°C)
Product
operation
32°F (0°C) - 113°F (45°C)
Battery
charging
39°F (4°C) - 104°F (40°C)
Charger
operation
39°F (4°C) - 104°F (40°C)
Battery
storage
32°F (0°C) - 113°F (45°C)
Battery
discharging
32°F (0°C) - 113°F (45°C)