MasterForce MFX2U2200 - Operating Instructions; Adjusting Soap Levels on Foam Cannon

Page 9
ASSEMBLY INSTRUCTIONS
Attach Foam Cannon (O) into end of lance (I)
by pressing cannon into place. It will make a
“click” sound when firmly in place.
Note:
Always lock spray gun when changing
the foam cannon to ensure it does not eject
with force.
• When using the foam cannon, fill it with a
properly formulated detergent or cleaner
with water ratio according to instructions on
the container.
Foam Cannon Storage
Store the foam cannon (O) on the back of the
hose hook (A).
Pull back on collar at the other end of high
pressure hose (N). Push firmly to connect
hose to pressure washer unit. Twist collar to
secure. Confirm hose is locked into pressure
washer unit by slightly pulling on hose. The
hose is now securely attached.
Attach a garden hose to built in garden hose
adapter. The water is now connected to your
pressure washer.
Note:
Flush out garden hose before
connecting to garden hose adapter
.
I
O
FIG.13
O
A
FIG.14
1
N
3
2
N
FIG.15
F
FIG.16
You have now completed the assembly
and are ready to begin using your electric
pressure washer. Read and observe all safety
instructions.
96048_IM_MFX2U2200.indd 996048_IM_MFX2U2200.indd 9 2020/12/10 上午10:402020/12/10 上午10:40