Page 9
ASSEMBLY
UNPACKING
This product requires assembly.
• Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the package contents section
are included.
• Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the product.
• If any parts are damaged or missing, please
call 1-844-MSTR4CE (844-678-7423) for
assistance.
FIT THE POLE SAW
1. The saw head can be mounted directly on
pole saw handle to achieve the standard
length.
2. Insert the pole saw handle in the saw
head.
3. Slide the collar upwards and turn it clock-
wise until it is completely tightened.
FIG. 1
EXTENSION OF THE POLE SAW
The maximum reach can be achieved by
handle and the saw head.
1. Slide the collars up and rotate it clockwise
until it is completely tightened.
NOTE: Periodically check the tightness of the
connection of the collars.
FIG. 2
WARNING
Do not allow familiarity
with this product to make you careless. Re-
member that a careless fraction of a second is
WARNING
Do not use any attach-
ments or accessories not recommended by
the manufacturer of this product. The use of
attachments or accessories not recommended
can result in serious personal injury.
ATTACH MACHINE TO SHOULDER
STRAP
1. Attach the carabiner to the carrying ring on
the pole.
2. Put on the shoulder strap.
3. Adjust the length of the strap so that the
carabiner is about a hand’s width below
your right hip.
Extension pole
Power Head Pole
Handle Pole
FIG. 3
1
2
1
2
To Next Page
Loading...