Page 11
OPERATION
NOTE: Remove the battery pack and keep
hands clear of the trigger lock when you
move the machine.
IMPORTANT: Examine the chain tension be-
fore each use.
EXAMINE THE CHAIN OIL
NOTE: Do not use the machine without
1. Examine the oil level of the machine from
the oil indicator.
2. Add the oil if it is necessary.
START / STOP THE MACHINE
To start
1. Install the battery pack into the machine.
2. Pull the trigger lock upward.
3. Press the trigger.
To stop
1. Release the trigger to stop the machine.
FIG. 7
Trigger Lock
Trigger
DELIMBING A TREE
WARNING
Make sure that there
is nothing or nobody in the area where the
branches fall. Stand opposite the branch you
will cut.
• Start to cut the higher branches.
• Then cut the lower branches.
• Cut downwards to prevent the bar from
jamming.
FIG. 8
LIMB TREE BRANCHES
Limbing is to remove the branches from a
fallen tree.
1. Keep the larger lower branches to hold
the log off the ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the
bottom up.
4. Keep the larger lower branches as a sup-
port until the log is limbed.
FIG. 9
To Next Page
Loading...