MasterMover MasterTug MT1500+ - General Information; Storing the Machine; Model Names; Noise Levels

General Information
6
General Information
Storing the Machine
It is important to have a designated storage and charging area, in a dry place indoors. Store in a
suitable place away from aisles and passageways as to avoid it being an obstacle and trip
hazard.
Model Names
The first two or three letters of the machine model indicate which family it is part of. If it has a
plus ‘+’ symbol at the end, this denotes it has hydraulic functionality.
Abbreviated family name
Full family name
SM
SmartMover
MT
MasterTug
AT
All Terrain
AT TOW
All Terrain Tow
MH
MasterHandler
MP
MasterPusher
GBM
Gas Bottle Mover
TMS
Trailer Moving System
CEM
Cummins Engine Mover
RCM
Roll Cage Mover
Noise Levels
This is a quiet, electrically-operated machine. These are the typical noise levels at the operator’s
position:
Noise level
Decibels (dBA)
Motor operation in high
speed mode, at maximum
speed
≤ 80*
1
Flashing safety light and
motion bleeper
80
Horn output
95
*
1
Tested on concrete floor
IP rating
The IP rating varies from machine to machine – please refer to page 1 of your machine Bolt-On
manual for more information.
Cleaning
When cleaning your MasterMover (including Stainless Steel machines), do not use solvents or
pressurised water*
2
as this can damage the machine and the internal components invalidating
your warranty. Instead we recommend to use a damp, non-abrasive cloth or sponge with a mild
detergent or soap. Avoid cleaning pastes and detergents containing chloride.
*
2
Only the MT5/400+SS IP55 can be subjected to pressurised water.